- Overview
- Application
- Key Features
- Specification
- Download
- Related Products
Powerful Dual-Band Outdoor WLAN Solution
PLANET WDAP-8350 comes with a high transmission power of 500mW which can bridge two remote nodes in 5GHz frequency band and provides 2.4GHz wireless access for clients over longer distance range. Its fully protection hardware design make it capable to ward off direct lightning strikes and unpredictable harsh weathers. Furthermore, the WDAP-8350 adopts the high-class Qualcomm Atheros SoC (System-on-a-Chip) and Dual-OS Backup mechanism that provide higher stability to meet the stringent requirements of outdoor solution. | | | | | | | More Flexible to Outdoor Environments
By dual-RF design and connecting optional specific types and higher gain antennas to its N-Type antenna connectors, the WDAP-8350 can adapt to various applications including connecting IP cameras at multiple locations to the security control center to deploy a surveillance system, or relaying the wireless signal from the urban to the suburban to provide wireless internet service to rural residents simultaneously. With the WDAP-8350, an outdoor wireless infrastructure can be speedily deployed, thus realizing an outdoor long distance setup of a dual-purpose unit. | | | | | | | All-Weather Rugged Protection
With the IP66 rated aluminum housing, Surge Arrester, Heater design and wide range of operating temperature from -40 to 70 degrees C, PLANET WDAP-8350 can perform normally under rigorous weather conditions, including heavy rain with lightning, wind, hot and cold climates thus maintain the connection stable as the same as in the general environments. | | | | | | | Seamlessly Failover and Roaming
In the actual user experience, feel the importance of setting up the redundancy, the WDAP-8350 enables the auto failover mechanism by using dual images (Dual-OS) while the active OS falls can immediately switch to the standby OS, that eliminates the difficulty of real-time support in long distance and make failover as simple as possible. Furthermore, it enhanced handover of clients between APs by improving the handshaking process to promote better performance, thus reducing the handoff times between APs and associated clients can quickly handover to the nearby AP without any disconnection. Benefit from the auto-backup and fast-roaming, the WDAP-8350 achieved non-disruptive path failover and seamlessly roaming.
High-Efficiency and Practical Solution to Separate Various Applications
PLANET WDAP-8350 supports multiple SSIDs (16 sets of SSIDs for each band) to allow each virtual wireless network to have a different set of security and also capable to map each VAP to specific virtual network through the use of VLAN tagging which enables isolation of guest and corporate networks. In addition, its multicast rate adaptation mechanism guarantees the wireless bandwidth and service quality by dynamic or fixed the multicast rate of video streaming, which prevents from capacity wasting of multicast packets thus utilize available bandwidth with more efficiency.
Advanced Value-added Characteristic
Featuring IPv4/IPv6 dual-stack network, the WDAP-8350 can work with original IPv4 network structure and also support the cutting-edge IPv6 network, which provides migration from IPv4 to IPv6 network with ease. With the dynamic power saving mode implementation, it capable to detect the traffic loading, which consumes low standby power automatically, thus reducing power consumption lower than 30% for energy saving to service provider.
Easy Deployment and Management
Compliant with IEEE 802.3at PoE+ (Power over Ethernet) standard, the WDAP-8350 can be powered by a single UTP cable besides providing data transmission. It thus reduces the needs of extra cables and dedicated electrical outlets where are difficult to reach in outdoor environment. It enables the wireless LAN deployment becomes more flexible and worries free from the power outlet locations. Moreover, with the Planet Smart Discovery Utility, the WDAP-8350 is convenient to be configured remotely and with the Wireless Location Management, it is easy to locate online clients’ information. | | | | | | |
Perfect Dual-Band Infrastructure and Flexible Antenna Combination to Outdoor Harsh Environment
Adapted with high-power, long distance, stronger reliability of comprehensive characteristic, the WDAP-8350 not only equipped with durable and robust hardware design, but also dramatically boost wireless efficiency to outdoor Infrastructure. By connecting optional specific types and higher gain antennas to functioning with its dual RF design, the WDAP-8350 can adapt to various applications. For example to establish the backhaul link through the 5GHz RF interface and relaying the wireless signal through the 2.4GHz interface to provide internet service to rural residents simultaneously. With the WDAP-8350, an outdoor wireless infrastructure in a harsh environment can be speedily deployed to save cost and time.
**To get the best results, matching the WDAP-8350 with our related products is recommended. | | | | | | |
Industrial Compliant Wireless LAN & LAN- Compliant with IEEE 802.11n 2T2R MIMO, backward compatible with 802.11a/b/g standard
- Simultaneous 2.4GHz and 5GHz wireless connectivity
- Equipped with gigabit LAN and 600Mbps wireless connectivity (Dual-N Band)
- IPv4 and IPv6 dual-stack management networks
Radio and Outdoor Characteristics- Built-in 4 N-Type (Female) antenna connectors
- High Output Power Up to 500mW with multiple adjustable transmit power control
- Built-in surge arrester and ground terminal for lightning protection
- IP66 aluminum case protection
- IEEE 802.3at Power Over Ethernet Design
- Wide Operating Temperature: -40 ~ 70 degrees C
Wireless Feature Characteristics- Dual-N Band performs backhaul WDS link at 5GHz and relay wireless signal at 2.4GHz
- Multiple Wireless Modes: AP, WDS PtP, WDS PtMP
- Supports up to 16 Multiple-SSID at each frequency band
- Multicast Rate Adaptation guarantees wireless bandwidth and service quality
- Space-in-kilometer control with automatically Ack timeout detection smart for long range connection
Secure and High Reliability Network Management- Advanced 128-bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK(TKIP/AES) security, and 802.1x Authentication
- Supports IEEE 802.1Q tagged VLAN over WDS or mapping up to 32 SSIDs
- Dual-image (dual-OS) backup mechanism
- Easy Web-based UI and PLANET smart discovery supported
- Telnet Command Line Interface
- Auto power saving mode reduces power consumption to 30%
- Easy locate online clients information through the Wireless Location Management
- System status monitoring includes statistics, associated client list
| | |
| Hardware |
| Interface |
Wireless: IEEE 802.11n 2.4GHz and 5GHz concurrent, 2T2R MIMO
LAN: 10/100/1000Base-T, Auto-MDI/MDIX, IEEE 802.3at PoE PD |
| Antenna |
Built-in 4 N-type (female) antenna connectors with surge arrestor
※ The outdoor antennas need to be purchased separately |
| Button/Connector |
Reset Button, Ground Terminal, Ground Lug |
| LED |
PWR, LAN, 2.4G, 5G |
| Material |
Aluminum |
| Dimensions (W x D x H) |
220 x 95 x 220mm |
| Weight |
2.34kg |
| Power Requirement |
IEEE 802.3at PoE+ |
| Power Consumption (max.) |
< 24W (high-loading and heater started)
< 7W (power saving mode) |
| Mounting Type |
Mast, Wall mount |
| Wireless Interface Specifications |
| Wireless Standard |
IEEE 802.11a/n 5GHz
IEEE 802.11b/g/n 2.4GHz |
| Antenna Structure |
802.11n: 2T2R MIMO at each frequency band |
| Data Rate |
IEEE 802.11b: 1, 2, 5.5, 11Mbps
IEEE 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54Mbps
IEEE 802.11n (20MHz): up to 150Mbps
IEEE 802.11n (40MHz): up to 300Mbp at each frequency band |
| Media Access Control |
CSMA/CA |
| Modulation Type |
802.11a/g/n: OFDM (BPSK / QPSK / 16QAM / 64QAM)
802.11b: DSSS (DBPSK / DQPSK / CCK) |
| Band Mode |
2.4G / 5G concurrent mode |
| Frequency Range |
2.4GHz: 2.400 ~ 2.484GHz
5GHz: 5.150 ~ 5.850GHz |
| Operating Channel |
■ 2.4GHz
America/ FCC: 1~11
Europe/ ETSI: 1~13
■ 5GHz
America/ FCC:
36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165 (total 24 channels)
Europe/ ETSI:
36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 132, 136, 140 (total 16 channels)
※ 5GHz channel list may be vary in different countries and
restricted to abide by regional regulatory compliance. |
| Channel Width |
20MHz/40MHz |
| Max. RF Power |
27dBm for all rate levels and modulation modes |
| Output Power Control |
1 ~ 100% |
| Software Features |
| Wireless Mode |
AP
WDS PTP
WDS PTMP |
| Wireless Encryption |
WEP (64/128-bit) encryption security
WPA / WPA2 (TKIP/AES)
WPA-PSK / WPA2-PSK (TKIP/AES)
802.1x Authentication |
| Wireless Advanced |
Enable/Disable SSID Broadcast
Max. Associated Station Number Restriction
Multiple SSIDs: up to 16 at 2.4GHz and 16 at 5GHz
Supports multiple VLANs mapping to multiple SSIDs
Supports fast roaming across APs
Provides wireless statistics |
| Max. Wired Client |
Unlimited |
| Max. Wireless Client |
Theoretical value: 127 at each band
Recommended value: 50 at each band |
| Max. WDS Peers |
Up to 16 at 2.4GHz and 16 at 5GHz |
| QoS |
Supports Multicast Rate Adaptation Mechanism to guarantee the wireless bandwidth and service quality |
| LAN |
Static IP, DHCP
IPv4, IPv6 dual-stack management network
Supports 802.1Q tagged VLAN |
| System Management |
Web-based (HTTP) and Telnet Command Line Interface
Supports NTP synchronization
Easy firmware upgrade via HTTP/TFTP
Easy system backup/restore via HTTP/TFTP
Easy locate online clients information through the Wireless Location Management
Supports Dual-OS auto-backup mechanism
Supports Auto Power Saving Mode mechanism
Supports PLANET Smart Discovery Utility |
| Standards Conformance |
| Standard Compliance |
IEEE 802.11n (2T2R, dual-n band up to 600Mbps)
IEEE 802.11a
IEEE 802.11g
IEEE 802.11b
IEEE 802.11i
IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3ab 1000BASE-T |
| Other Protocols and Standards |
CSMA/CA, CSMA/CD, TCP/IP, DHCP, ICMP, SNTP |
| Environment & Certification |
| Temperature |
Operating: -40 ~ 70 degrees C
Storage: -40 ~ 75 degrees C |
| Humidity |
Operating: 10 ~ 95% (non-condensing)
Storage: 5 ~ 95% (non-condensing) |
| IP Level |
IP66 |
| ESD Protection |
±15kV air-gap discharge
±8kV contact discharge |
| Surge Protection |
±6kV line to ground
±2kV line to line |
| MTBF |
1553658 hrs at 25 degrees C
335788 hrs at 60 degrees C |
| EMC Emissions Class |
B |
| Regulatory Compliance |
CE, FCC, RoHS |
Quick Guide
| Date |
Version |
Description |
Download |
| 2015-11-13 |
1.0 |
Initial release. |
 | |
| Photo |
Model |
Description |
 |
XGSW-28040HP |
L2+ 24-Port 10/100/1000Mbps 802.3at PoE + 4-Port 10G SFP+ Managed Switch with Hardware Layer3 IPv4/IPv6 Static Routing |
 |
GS-4210-24P2S |
24-Port 10/100/1000T 802.3at PoE + 2-Port 100/1000X SFP Managed Switch |
 |
GS-4210-24P4C / GS-4210-24PL4C |
24-Port 10/100/1000T 802.3at PoE + 4-Port Gigabit TP/SFP Combo Managed Switch |
 |
GS-4210-8P2S |
8-Port 10/100/1000T 802.3at PoE + 2-Port 100/1000X SFP Managed Switch |
 |
GS-4210-8P2T2S |
8-Port 10/100/1000Mbps 802.3at PoE + 2-Port 10/100/1000Mbps + 2-Port 100/1000X SFP Managed Switch |
 |
GS-5220-8P2T2S |
L2+ 8-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/1000T + 2-Port 100/1000X SFP Managed Switch |
 |
IGS-10020HPT |
Industrial 8-Port 10/100/1000T 802.3at PoE + 2-Port 100/1000X SFP Managed Switch with Wide Operating Temperature |
 |
IGS-504HPT |
Industrial 5-Port Gigabit Switch w/ 4-Port 802.3at PoE+ |
 |
IGS-624HPT |
Industrial 4-Port 10/100/1000T 802.3at PoE+ w/ 2-Port 100/1000X SFP Ethernet Switch |
 |
IPOE-162 |
Industrial IEEE 802.3at Gigabit High Power over Ethernet Injector (Mid-Span) |
 |
IPOE-162 |
Industrial IEEE 802.3at Gigabit High Power over Ethernet Injector (Mid-Span) |
 |
IPOE-E174 |
1-Port Ultra PoE to 4-Port 802.3af/at Gigabit PoE Extender |
 |
POE-161 |
IEEE 802.3at Gigabit High Power over Ethernet Injector (Mid-Span) |
 |
POE-163 |
IEEE 802.3at Gigabit High Power over Ethernet Injector (Mid-Span) |
 |
POE-171 |
Single-Port 10/100/1000Mbps Ultra PoE Injector (60 Watts) |
 |
POE-173 |
60-Watt Ultra Power over Ethernet Injector |
 |
SGS-5220-24P2X |
L2+ 24-Port 10/100/1000T 802.3at PoE + 2-Port 10G SFP+ Stackable Managed Switch / 440W |
 |
SGS-6340-24P4S |
Layer 3 24-Port 10/100/1000T 802.3at PoE + 4-Port 1000X SFP Stackable Managed Switch (370W) |
 |
WGS-804HP |
8-Port 10/100/1000T Wall Mounted Gigabit Ethernet Switch with 4-Port PoE+ |
 |
WGSD-10020HP |
L2+ 8-Port 10/100/1000T + 2-Port 100/1000X SFP Managed 802.3at PoE Switch |
 |
WGSW-20160HP |
16-Port 10/100/1000Mbps 802.3at PoE + 4-Port Gigabit TP / SFP Combo Managed Switch |
 |
WGSW-24040HP / WGSW-24040HP4 |
24-Port 10/100/1000Mbps 802.3at PoE+ with 4 Shared SFP Managed Switch |
 |
WNAP-6335 |
2.4GHz 300Mbps 802.11n Outdoor Wireless AP/Router (2 x RP-SMA Connector) |
 |
WNAP-7325 |
5GHz 300Mbps 802.11a/n Outdoor Wireless CPE (Built-in 14dBi Antenna) |
 |
WNAP-7335 |
5GHz 300Mbps 802.11a/n Outdoor Wireless AP/Router (2 x RP-SMA Connector) |
|