| Specificații hardware |
| Port 10/100 / 1000Base-T |
1-Port RJ-45 interface, auto-negotiation and auto MDI / MDI-X |
| Interfața 1000Base-X Fiber |
IGTP-802T: SC
IGTP-802TS: SC
IGTP-805AT: SFP (LC) |
| Fiber Cable |
IGTP-802T
Multi-mode: 50/125um or 62.5/125um optic fiber
IGTP-802TS
Single-mode: 9/125um optic fiber
IGTP-805AT
Vary on SFP Module |
| Distanța de cablu |
IGTP-802T: 220m / 550m
IGTP-802TS: 10km
IGTP-805AT: Vary on SFP Module |
| Frecventa optica |
IGTP-802T: 850nm
IGTP-802TS: 1310nm
IGTP-805AT: Vary on SFP Module |
| Lansați puterea |
IGPT-802T:
Max. -4dBm
Min. -9.5dBm
IGTP-802TS:
Max. -3dBm
Min. -9.5dBm
IGTP-805AT:
Vary on SFP Module
|
| Primiți sensibilitate |
IGTP-802T: -13.5dBm
IGTP-802TS: -14.4dBm
IGTP-805AT: Vary on SFP Module |
| Putere maximă de intrare |
IGTP-802T: -18dBm
IGTP-802TS: -20dBm
IGTP-805AT: Vary on SFP Module |
| Portul PoE IEEE 802.3at / 802.3af |
1, End-Span, 1/2(+), 3/6(-) |
| Indicarea LED-urilor |
System:
Power 1, Power 2 and Fault LED (Green)
Fiber port:
LNK / ACT (Green)
10/100/1000Base-T port:
LNK / ACT, PoE In-use (Green / Orange) |
| Link Fault Întrerupător DIP de trecere |
ON / OFF |
| Controlul debitului |
Back pressure for half duplex, IEEE 802.3x pause frame for full duplex |
| Dimensiunea maximă a cadrului |
9216 bytes |
| Cerinte de putere |
24V DC or 48V DC, redundant power with polarity reverse protect function |
| împrejmuire |
IP30 aluminum metal case |
| Dimensiuni (L x Î x H) |
135 x 87 x 32mm |
| Greutate |
IGTP-802T / IGTP-802TS: 510g
IGPT-805AT: 500g
|
| Instalare |
DIN rail kit and wall mount ear |
| Protecția ESD |
6KV DC |
| Protecția EFT |
6KV DC |
| Alarma |
Provides one relay output for power fail
Alarm relay current carry ability: 1A @ DC 24V
|
| Viteză |
Twisted-pair:
10/20Mbps for half / full-duplex, 100/200Mbps for half / full duplex
1000/2000Mbps for full duplex
Fiber-Optic:
200Mbps / 2000Mbps for full-duplex
|
| Cabluri de rețea |
10/100/1000Base-T:
2-Pair UTP Cat. 3, 4, 5, 5e, 6 (maximum 100 meters)
EIA / TIA-568 100-ohm STP (maximum 100 meters)
100Base-FX / 1000Base-SX / LX:
Multi-mode: 50/125um or 62.5/125um optic fiber
Single-mode: 9/125um optic fiber
|
| Consumul de energie |
24V: 33 watts / 112BTU, 48V: 31 watts / 105BTU (With PoE)
|
| Putere peste Ethernet |
| PoE Standard |
IEEE 802.3af / 802.3at High Power over Ethernet / PSE |
| Tip de alimentare PoE |
End-Span |
| Putere de ieșire PoE |
52V DC. 15.4 watts
52V DC. 30 watts |
| Alocarea pinilor de putere |
1/2(+), 3/6(-) |
| Conformitatea standardelor |
| Respectarea standardelor |
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX / FX Fast Ethernet
IEEE 802.3ab 1000Base-T Gigabit Ethernet
IEEE 802.3z 1000Base-SX / LX Gigabit Ethernet
IEEE 802.3x Full-Duplex Flow Control
IEEE 802.3af Power over Ethernet
IEEE 802.3at High Power over Ethernet
|
| Reglementarea conformității |
FCC Part 15 Class A, CE |
| Testul de stabilitate |
IEC60068-2-32 (Free fall)
IEC60068-2-27 (Shock)
IEC60068-2-6 (Vibration)
|
| Specificații de mediu |
| Temperatura |
Operating: -30~75 degrees C
Storage: -40~85 degrees C |
| Umiditate |
Operating: 5~90% (non-condensing)
Storage: 5~90% (non-condensing) |
