PLANET Long Reach PoE solution is designed to extend IP Ethernet transmission and inject power simultaneously into a remote 802.3af/at PoE compliant powered device (PD) beyond the 100 meters distance limit of Ethernet.
Convenient PoE over Coaxial Extender in Harsh Environment
The LRP-101C-KIT, a PLANET Long Reach PoE solution, is a Single-port PoE over Coaxial Extender Kit featuring long range data and power transmission for distance up to 1,000m (3,280ft.) over coaxial cable, and another 100m over Ethernet cable to remote PoE IP camera, PoE wireless AP or access control systems complied with 802.3af/at PoE. The LRP-101C-KIT provides point to point application for easy plug-n-play operation and deployment in climatically demanding environments with wide temperature range from -20 to 70 degrees C. Without the problem of power source, it makes the installation of remote PoE powered devices easier and more efficiently. |
| |
| |
| |
|
| |
| |
| |
Composition of Long Reach PoE over Coaxial Extender Kit
The LRP-101C-KIT consists of a Long Reach PoE injector and a Long Reach PoE extender set which can work in pair anywhere on your network infrastructure. It contains two brand-new products:
■ LRP-101CH: 1-Port 10/100TX PoE PD + 1-Port Coax Long Reach PoE Injector
■ LRP-101CE: 1-Port 10/100TX PoE PSE + 1-Port Coax Long Reach PoE Extender
The LRP-101CH transmits data and power over coaxial cable to the LRP-101CE, which can be located as far as 1,000m away. It will then deliver the data and power output with a maximum of up to 25 watts to a PoE PD over Ethernet cable, thus expediting the IP surveillance network or wireless LAN infrastructure in long distance. Both of the two products come in a compact but rugged metal housing. Their wall-mounted design fits easily in any space-limited location.
|
| |
| |
| |
|
| |
| |
| |
| | | | | | IP Ethernet and Power over Long Existing Coaxial Cable
A normal UTP cable can only be extended up to 100 meters, but the LRP-101C-KIT can extend PoE networking up to 1,000 meters (3,280ft.) over existing 75 ohm coaxial cable with stable, high-quality video transmission. It eliminates the need for additional remote site power while allowing a single power source to provide power to both LRP extenders and the PoE IP camera at long range. | | | | | | | | | | | | | | | | | | | | |
The LRP-101C-KIT includes two products: The LRP-101CH, a Coax Long Reach PoE Injector (LRP injector), and the LRP-101UE, a Coax Long Reach PoE Extender (LRP extender). Working in pair, the LRP-101CH can be powered by either external DC power adapter or PoE+ Ethernet switch, and from there, the LRP-101CE’s 802.3at standard PoE output goes to PoE Powered Device (PD). The LRP-101C-KIT can be widely used in Intelligent Transportation Systems (ITS), traffic surveillance, security monitoring, automation control, intelligent residential districts and so on.
The LRP-101C-KIT can function in two different kinds of combinations:
Type 1: LRP-101CH with PoE power input and LRP-101CE with PoE power output
The LRP-101CH injector is powered by IEEE 802.3at/af PoE source and it transmits data and power over coaxial cable to the LRP-101CE extender. An IEEE 802.3at/af compliant PoE PD will then automatically be powered by the LRP-101CE via UTP cabling. | | | | | | | | | | | | | | | | | | | | Type 2: LRP-101UH with 48~56V DC power input and LRP-101UE with PoE power output
The LRP-101UH injector is powered via the DC power adapter and it transmits data and power over UTP cable to the LRP-101UE extender. An IEEE 802.3at/af compliant PoE PD will then automatically be powered by the LRP-101UE via UTP cabling. | | | | | | | | | | | | | |
Power over Ethernet- Eliminates power cabling with PoE over coaxial
- Supports Power over Ethernet PSE (PoE Injector)
- Power and Ethernet data transmission of 1,000m over coaxial cabling
- Complies with IEEE 802.3af / IEEE 802.3at Power over Ethernet PD on RJ45 port
- Supports Long Reach PoE power up to 30.8 watts (depending on power source and cable distance)
- Supports PoE Power up to 25 watts (depending on power source and cable distance)
- Auto detects remote powered device (PD)
- Plug and Play; no PC required
Industrial Case and Installation- Supports extensive LED indicators for network diagnostics
- Metal case protection
- Compact size, DIN-rail and wall-mount design
- Supports EFT surge protection of 2kV DC for power line
- Supports Ethernet ESD protection of 4KV DC
- -20 to 70 degrees C operating temperature
| | |
| Hardware Specifications |
| Ethernet Interface |
LRP-101CH
■ Copper: 10/100BASE-TX RJ45, auto-negotiation / auto-MDI/MDI-X
■ Power over Ethernet Standard: IEEE 802.3at/af PoE PD (Powered Device)
■ PoE Input: Supports both Mid-span and End-span PSE Input Range: 48~56V DC
■ Data Rate: 100/100Mbps
■ Cabling: Cat5e or above
■ Maximum Distance: 100 meters
■ Maximum Frame Size: 1522 bytes
LRP-101CE
■ Copper: 10/100BASE-TX RJ45, Auto-negotiation / auto-MDI/MDI-X
■ Power over Ethernet Standard: IEEE 802.3at/af PoE PSE
(Power Source Equipment)
■ PoE Output: 56V DC, 600mA max.
■ PoE Budget: Up to 25 watts
■ PoE Mode: End-span, RJ45 Pin 1/2(+), 3/6(-)
■ Data Rate: 100/100Mbps
■ Cabling: Cat5e or above
■ Maximum Distance: 100 meters
■ Maximum Frame Size: 1522 bytes |
| Long Reach PoE Interface |
LRP-101CH
■ Connectivity: 1 x BNC female connector Long Reach PoE over coaxial PSE
(Power Source Equipment)
■ Power Output: 41~56V DC
■ Power Pin Assignment:
BNC center pole: DC+
BNC shield: DC-
■ Cabling:
Coaxial cable: 75 ohm
RG-6/U cable, less than 12Ω/1,000ft.
RG-59/U cable, less than 30Ω/1,000ft.
■ Maximum Distance:
Max. 200m with PoE+ output (656ft.)
Max. 1000m with PoE output (1,968ft.)
Max. 1600m without PoE output (3,937ft.)
■ Long Reach Ethernet Standard: IEEE 1901
■ Modulation Type: Wavelet-OFDM
■ Security: 128-bit AES encryption
■ Frequency Band: 2 ~ 28 MHz
■ Encryption: AES 128-bit
■ LRP Compatibility: LRP-101CE, 1-Port LRP Extender
LRP-101CE
■ Connectivity: 1 x BNC female Long Reach PoE over coaxial PD
(Powered Device)
■ Power Input: 37~56V DC
■ Power Pin Assignment:
BNC center pole: DC+
BNC shield: DC-
■ Cabling:
Coaxial cable: 75 ohm
RG-6/U cable, less than 12Ω/1,000ft.
RG-59/U cable, less than 30Ω/1,000ft.
■ Maximum Distance:
Max. 200m with PoE+ output (656ft.)
Max. 1000m with PoE output (1,968ft.)
Max. 1600m without PoE output (3,937ft.)
■ Long Reach Ethernet Standard: IEEE 1901
■ Modulation Type: Wavelet-OFDM
■ Security: 128-bit AES encryption
■ Frequency Band: 2 ~ 28 MHz
■ Encryption: AES 128-bit
■ LRP Compatibility: With power over coaxial input
LRP-101CH, 1-Port LRP Injector
LRP-822CS, 8-Port LRP over Coax Switch
LRP-1622CS, 16-Port LRP over Coax Switch
Performance**
Distance | Data Rate*
(Upload / Download) |
|
| LED Indicators |
LRP-101CH
4 x LEDs
■ PWR
■ LRP LNK
■ PoE IN
■ LNK/ACT
LRP-101CE
4 x LEDs
■ PWR
■ LRP LNK
■ PoE-in-use
■ LNK/ACT |
| ESD Protection |
4KV DC |
| EFT Protection |
LRP-101CH
■ 2KV
LRP-101CE
■ - |
| Enclosure |
Metal case |
| Installation |
Wall mount or DIN rail with optional kit |
| Dimensions (W x D x H) |
94 x 70 x 26 mm |
| Weight |
LRP-101CH
■ 200g
LRP-101CE
■ 375g |
| Power Requirements |
LRP-101CH
■ RJ45 PoE Input: 802.3at/af 48~56V DC
■ DC Input: 48~56V DC
LRP-101CE
■ BNC Power over Coaxial Input: 44~56V DC |
| Standards Conformance |
| Standards Compliance |
IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3af Power over Ethernet (802.3at Type 1)
IEEE 802.3at Power over Ethernet (802.3at Type 2) |
| Regulation Compliance |
FCC Part 15 Class A, CE |
| Environment |
| Temperature |
Operating: -20~70 degrees C
Storage: -40~75 degrees C |
| Humidity |
Operating: 5~95% (non-condensing)
Storage: 5~95% (non-condensing) |
| Note |
| Note |
*1.Upload: LRP-101CE to LRP-101CH,data stream.
Download: LRP-101CH to LRP-101CE,data stream.
2.As there are various resistance values in the category of RG-59/U or
RG-6/U cable,the actual data rate will vary on the quality of the copper
wire and environment factors.
**Depending on what the DC/PoE Power Input and the length of coaxial
cable are. |
Datasheet
| Date |
Version |
Description |
Download |
| 2015-06-12 |
1.0 |
LRP-101C-KIT |
 |
User's Manual
| Date |
Version |
Description |
Download |
| 2015-05-15 |
1.0 |
Initial release. |
 |
EC Declaration
| Date |
Version |
Description |
Download |
| 2015-05-15 |
1.0 |
EC Declaration |
 | |
| Photo |
Model |
Description |
 |
XGSW-28040HP |
L2+ 24-Port 10/100/1000Mbps 802.3at PoE + 4-Port 10G SFP+ Managed Switch with Hardware Layer3 IPv4/IPv6 Static Routing |
 |
GS-4210-24P2S |
24-Port 10/100/1000T 802.3at PoE + 2-Port 100/1000X SFP Managed Switch |
 |
ICA-2250VT |
Industrial PoE Plus Outdoor IR IP Camera |
 |
ICA-4200V |
Full HD 20M IR Vari-focal Dome IP Camera |
 |
ICA-HM620 |
2 Mega-Pixel PoE Plus Speed Dome Internet Camera |
 |
LRP-101U-KIT |
1-Port Long Reach PoE over UTP Extender Kit (LRP-101UH + LRP-101UE) |
 |
POE-162S |
IEEE 802.3at Gigabit High Power over Ethernet Splitter |
 |
POE-E201 |
IEEE 802.3at Power over Gigabit Ethernet Extender |
 |
VIP-5060PT |
Professional HD PoE IP Phone (6-Line) |
 |
WDAP-C7200AC |
1200Mbps 802.11ac Dual Band Ceiling Mount Wireless Access Point |
 |
WGSW-24040HP / WGSW-24040HP4 |
24-Port 10/100/1000Mbps 802.3at PoE+ with 4 Shared SFP Managed Switch |
|
|
|
|