Distribuitor Oficial PLANET Romania

Home > Product > Wireless LAN > Outdoor Wireless LAN > WBS-502AC

Print Version

WBS-502AC

900Mbps 802.11ac Outdoor Wireless CPE

Overview
Application
Key Features
Specification
Download
Related Products

Ultra-high-speed Enterprise Outdoor Wireless Solution

PLANET WBS-502AC 5GHz 900Mbps 802.11ac Outdoor Wireless CPE supports IEEE 802.11ac standard with 2T2R MIMO mechanism, which brings the latest wireless technology into outdoor infrastructure. The WBS-502AC supports standard IEEE 802.3at Power over Ethernet (PoE) and features IEEE 802.3af PoE pass-through going to the secondary LAN port, which is able to supply power to the PoE IP camera or other PoE PD equipment. With excellent performance and concentrated antenna beamwidth, the WBS-502AC is definitely ideal for long-distance outdoor surveillance – be it PtP or PtMP application.

Bringing Superior 11ac Performance to Outdoor

To provide extremely high-speed user experience, the WBS-502AC adopts IEEE 802.11ac technology to extend the 802.11n 40MHz channel binding to 80MHz and the implementation of 256-QAM modulation where higher transmitting/receiving rates go up to 867Mbps in 5GHz frequency band with less interference. Equipped with Gigabit LAN ports, the WBS-502AC allows 11ac wireless traffic to directly access high-speed connection without the bottleneck of 100Mbps uplink wired connection, thus offering a better range and superior throughput than those of the 802.11a/n wireless outdoor CPE.

Multiple SSIDs with VLAN Tagging

Multiple SSIDs can broadcast up to 8 wireless networks with different names. For management purposes, the IEEE 802.1Q VLAN supported allows multiple VLAN tags to be mapped to multiple SSIDs to distinguish the wireless access or allows VLAN tags to pass through over WDS link. This makes it possible for the WBS-502AC to work with managed Ethernet switches to have VLAN assigned for a different access level and authority.

Value-added Outdoor Characteristics

The WBS-502AC is definitely suitable for wireless IP surveillance, and bridge link of building to building and backbone of public service. With standard IEEE 802.3at Power over Ethernet (PoE) design, the WBS-502AC can be powered by the remote PoE switch through the 100m Cat5e UTP cable and is able to supply power to the IP camera supporting IEEE 802.3af standard through the secondary LAN port. With the IP55-rated outdoor UV-resistant enclosure, the WBS-502AC can perform normally under rigorous weather conditions, meaning it can be installed in any harsh, outdoor environments.

Completely Secure Wireless Network

The WBS-502AC supports 152-bit WEP, WPA/WPA2, WPA-PSK and WPA2-PSK wireless encryptions, the advanced WPA2-AES mechanism and 802.1X RADIUS authentication, which can effectively prevent eavesdropping by unauthorized users or bandwidth occupied by unauthenticated wireless access. Furthermore, any users are granted or denied access to the wireless LAN network based on the ACL (Access Control List) that the administrator pre-established. To provide the secure Wi-Fi access for visitors, Guest Network feature allows you to create a temporary network with an individual SSID, security setting and DHCP settings to isolate the guest network to a separate network segment, thus preventing guests from being able to access files on intranet and also ensuring the guest's internet connectivity.

Deployment and Alignment within Minutes

In order to provide accurate antenna alignment, the WBS-502AC is equipped with a 360-degree 3D array of mounting brackets, greatly reducing deployment effort to easily achieve high-performance backhaul links over long distance through the built-in 19dBi higher gain antenna.

Hardware
Standard Support	IEEE 802.11a/n/ac IEEE 802.11i IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3ab 1000BASE-T IEEE 802.3x flow control
Memory	64 Mbytes DDR SDRAM 16 Mbytes Flash
Power Requirements	IEEE 802.3at PoE+
Interface	Wireless IEEE802.11a/n/ac, 2T2R PoE LAN (LAN 1): 1 x 10/100/1000BASE-TX, auto-MDI/MDIX, 54V 802.3at PoE in LAN 2: 1 x 10/100/1000BASE-TX, auto-MDI/MDIX, 802.3af PoE pass-through out
Button	Reset button
LED	PWR, LAN, WLAN, Signal Strength
Antenna	Built-in 19dBi directional antenna with dual polarization [Port1] HPBW Horizontal: 30 degrees HPBW Vertical: 18 degrees [Port2] HPBW Horizontal: 18 degrees HPBW Vertical: 30 degrees
Data Rate	IEEE 802.11a: up to 54Mbps IEEE 802.11n (20MHz): up to 150Mbps IEEE 802.11n (40MHz): up to 300Mbps 802.11ac (VHT20, Nss2-MCS8): Up to 173.3Mbps 802.11ac (VHT40, Nss2-MCS9): Up to 400Mbps 802.11ac (VHT80, Nss2-MCS9): Up to 867Mbps
Media Access Control	CSMA/CA
Modulation	Transmission/Emission type: OFDM Data Modulation type: OFDM with BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
Frequency Band	FCC: 5.180~5.580GHz, 5.660~5.825GHz ETSI: 5.180~5.240GHz
Operating Channels	United States --FCC: 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 132, 136, 140, 149, 153, 157, 161, 165 (21 channels) Europe --ETSI: 36, 40, 44, 48 (4 channels) 5GHz channel list will vary in different countries according to their regulations.
Max. Transmit Power (dBm)	FCC : up to 26 ± 2dBm ETSI : < 20dBm (EIRP)
Receiver Sensitivity (dBm)	IEEE 802.11a: -93/-76dBm (6/54Mbps) IEEE 802.11n (HT20): MCS0/ MCS8 : -92dBm MCS7/ MCS15 : -73dBm IEEE 802.11n (HT40): MCS0/ MCS8 : -89dBm MCS7/ MCS15 : -72dBm IEEE 802.11ac(VHT20): 802.11ac (VHT20, Nss2-MCS0): -92dBm 802.11ac (VHT20, Nss2-MCS8): -69dBm IEEE 802.11ac(VHT40): 802.11ac (VHT40, Nss2-MCS0): -89dBm 802.11ac (VHT40, Nss2-MCS9): -65dBm IEEE 802.11ac(VHT80): 802.11ac (VHT80, Nss2-MCS0): -86dBm 802.11ac (VHT80, Nss2-MCS9): -62dBm
Power Consumption	Maximum 24W (with PSE)
Power Requirements	LAN1: IEEE 802.3at PoE+, 48~56V DC in-line power
Environment and Certification
Operating Temperature	-20~70 degrees C
Operating Humidity	10~90% (non-condensing)
IP Level	IP55
Regulatory	CE, FCC, RoHS
Software
LAN 	■ Static IP ■ Dynamic IP ■ DHCP server in WISP mode Supports 802.1d STP (Spanning Tree Protocol)
WAN Connection Type (WISP Mode only)	■ Static IP ■ Dynamic IP ■ PPPoE ■ PPTP
Firewall	Offers DoS protection to guard user's content network against DoS attacks Built-in DMZ and Port Forwarding VPN Pass-through: 　■ PPTP Pass-through 　■ L2TP Pass-through 　■ IPSec Pass-through
Wireless Modes	■ Access Point ■ Client Bridge ■ WDS (AP/Bridge/Station) ■ Client Router (WISP)/Client AP Router (WISP+AP)
Channel Width	20MHz, 40MHz, 80MHz
Encryption Type	64-/128-/152-bit WEP, WPA, WPA-PSK, WPA2, WPA2-PSK, 802.1X
Wireless Security	Enable/Disable SSID Broadcast Wireless MAC address filtering up to 32 entries per SSID VAP Separation, Station Separation
Max. SSIDs	Up to 8
Max. Wireless Clients	127 per radio (32 suggested, depending on usage)
Max. WDS Peers	Up to 8 in WDS Bridge mode
Wireless QoS	Supports Wi-Fi Multimedia (WMM) Supports Wireless Traffic Shaping per Radio
Wireless Advanced Control	Auto Channel Selection Auto Transmit Power by Regular Domains Client Limit Control, RSSI Threshold Distance Control (Auto Ack Timeout) Wi-Fi Schedule
Status Monitoring	Connection Status Device Discovery, PLANET Smart Discovery Wireless Client List/WDS Link List DHCP Client Table System Log supports remote syslog server Signal Strength LEDs in Client Bridge and WDS Station modes
VLAN	VLAN pass-through over WDS, SSID-to-VLAN mapping Management VLAN (VID: 1~4094)
Self Healing	Supports auto reboot settings
NTP	Network Time Management
Management	Web-based UI, HTTPS, SSH, CLI (Command Line Interface) supported Configuration backup and restore Email alert SNMP v1/v2c/v3 support, MIB I/II, Private MIB
Diagnostic Tools	Built-in Ping, Trace Route, Speed Test Tools

Top